美国ED@D检测设备

电源

安规类检测设备

手机类检测设备

材料燃烧试验设备

插头插座类检测设备

电线电缆类检测设备

试验指、针、销系列

防水试验装置

玩具/纺织类检测设备

电磁兼容检测设备（EMC）

电器安规仪表检测设备

影像产品类(IEC60065)

家用电器类(IEC60335-1)

插头插座类(IEC60884-1)

医疗检测设备(IEC60601-1)

IT产品类(IEC60950)

防尘防水类(IEC60529)

灯具产品类(IEC60598)

电动工具系列(GB3883)

灯具系列(GB7000)

联系方式  联 系 人：       销售部 联系电话：0755- 26585726
      26747895
      26747896
         传真电话：0755-26747900

德迈盛传感仪器事业部

德迈盛进口仪器部

美国ABT测试设备公司

首页 >>> 产品目录 >>> 美国ED@D检测设备

更详细的产品分类

试验指、针、销系列材料燃烧系列

产品图片	产品名称/型号	产品简单介绍
	Short Test Pin Probe TPP-01	Used to test accessibility through enclosure openings per IEC, EN, UL and CSA Standards. Body is Delrin, tip is stainless steel. NOTE: Don’t ever purchase an all plastic version - the tip is too narrow to maintain tip rigidity!
	Long Test Pin Probe TPP-02	This pin is used on appliances for verifying that there is no access to hazardous live parts of heating elements which could be touched accidentally by a tool (i.e. screwdriver). Meets IEC & EN requirements. Body is Delrin, tip is stainless steel.
	Rigid Finger Probe UFP-01	A “rigid” version of the International Test Finger, model TFP-01, (see next page). Used for force applications on openings (i.e. vents) as required by IEC, EN, UL and CSA Standards. Handle made of Delrin, rigid finger made of chrome plated steel.
	1.0mm Test Wire TRP-02	Used to verify protection of persons against access with a wire. Meets IEC and EN Standards including IEC 529 for IP4 and suffix D codes. The handle and stop face are made of Delrin. The wire is made of stainless steel.
	2.5mm Test Rod TRP-01	Used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a tool. Meets IEC and EN Standards including IEC 529 for IP3 and suffix C codes. The handle and stop face are made of Delrin. The rod is made of stainless steel.
	3.0mm Preset Controls Probe PCP-01	Used to verify protection against access to hazardous parts by use of a tool through holes which give access to pre-set controls. Meets IEC, EN, UL and CSA Standards including IEC 1010, EN 61010-1, U- 3101-1, UL 3111-1 and CSA 1010-1. The handle and stop face are made of Delrin. The rod is stainless
	4.0mm Hazardous Live Parts Probe HLP-01	Used to verify protection against access to hazardous parts through top openings. Meets IEC, EN, UL and CSA Standards including IEC 1010, EN61010-1, UL3101-1, and CSA 1010-1. The handle and stop face are made of Delrin. The rod is made of stainless steel.
	Test Finger Probe TFP-01	This is the “International” test finger required by most IEC, EN and CSA Standards, in addition to many UL Standards. Built in strict accordance to the newest requirements - with integral palm simulator. This is the ONLY Finger Probe available with a integral jack in the handle for continuity testin
	UL Finger Probe ULP-01	This is the “UL” test finger, researched and designed by UL and required by most UL Standards. Palm simulator and restricted joint movement simulates human finger movement. Made of all nylon. Bell-Core accessory available.
	Articulated Probe with Discs ULP-02	Probe is required by GR-1089-CORE. Probe is plastic with 2 precision Delrin? disks. The disks are positioned at 35 mm. and 9 mm. from the top of probe. It is used to verify protection from hazardous parts.
	Test Thorn Probe THN-01	For testing accessibility in appliances with visibly glowing heating elements. Also for testing parts supporting such elements. Complies with IEC, EN, UL & CSA requirements. Made entirely of stainless steel.
	Test Sphere Probe TSP-01	This probe is intended to verify protection of persons against access to hazardous parts for an IP1 Code. Also used to verify protection from access with the back of the hand for an IP suffix A code.
	Test Sphere Probe TSP-02	This sphere is intended to verify the degree of protection of enclosures for an IP2 Code per IEC 529. Sphere is hardened steel with chrome finish.
	Rigidity Test Rod Probe RTR-01	For testing enclosure rigidity in accordance with clause 8.1 of IEC 1010 and the EN, UL and CSA versions of this Standard. Handle is Delrin, tip is stainless steel.
	Uninsulated Live Parts Probe TUP-01	For testing accessibility in accordance with many UL Standards. The handle is Delrin and the tip is stainless steel.
	Enameled Wire Probe EWP-01	For testing accessibility in accordance with many UL Standards. In many Standards, this probe is used for access to enamel coated wire (i.e. transformers and inductors). The handle is Delrin and the tip is stainless steel.
	Hazardous Moving Parts Probe HMP- 01	For testing accessibility to hazardous moving parts such as access to fan blades through a fan finger guard. Complies with UL Standards. Made entirely of stainless steel, weighs 1 lb.
	Coin Probe CP-01	Four probes in one! Used to determine accessibility to shock hazards in many household and audio/video products, including Standards UL 1410 and UL 6500. Made entirely of nickel-plated steel.
	Test Hook Probe TH-01	Used on enclosures prior to accessibility testing. The test hook is “hooked” into vents and seams in the enclosure & then pulled with a force (usually 20N). The hook has a hole at its long end, for use in conjunction with a PFI series Force Gauge. Made entirely of stainless steel.
	Finger Nail Probe FNP-01	For testing the requirement of snap-in devices and snap together enclosures that protect the user from accessibility to hazardous parts. Complies with most Standards including IEC 335 based Standards and UL 1025.